Question No : 1
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?

• A.Only a traffic rate and burst size can be defined for a queue
• B.Limits can be defined only for broadcast and multicast traffic
• C.Rate limiting and egress queue shaping can be used to restrict inbound traffic
• D.Rate limiting and egress queue shaping can be applied globally

Show Answers

Answer:
Explanation:
you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.

Question No : 2
An administrator is concerned about the security of the control plane connection between an AOS-CX switch and an Aruba Mobility Controller (MC) when implementing user-based tunneling.
How should the administrator protect this traffic?

• A.IPSec with a digital certificate
• B.GRE with a pre-shared key
• C.PAPI with an MD5 pre-shared key
• D.IPSec with a pre-shared key

Show Answers

Answer:

Question No : 3
What is correct regarding the configuration of ACLs on AOS-CX switches?

• A.Statements with the log keyword are always processed by the switch CP
• B.Standard ACLs are used to match on routes when performing route distribution.
• C.Wildcard masks are used to match on a range of IP addresses.
• D.Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs.

Show Answers

Answer:

Question No : 4
When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command?

• A.<ESC>
• B.">"
• C.Space
• D.Tab

Show Answers

Answer:

Question No : 5
How is voice traffic prioritized correctly on AOS-CX switches?

• A.By defining device profiles with QOS settings
• B.By placing it in the strict priority queue
• C.By implementing voice VLANs
• D.By implementing weighted fair queueing (WFQ)

Show Answers

Answer:

Question No : 6
Examine the partial output of the BGP routing table of an AOS-CX switch:



The switch is learning about four possible path to reach the 1.0.0.0/8 network.
Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?

• A.192.168.1.5
• B.192.168.2.5
• C.192.168.3.5
• D.192 1684 5

Show Answers

Answer:

Question No : 7
Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?

• A.Switch(config)# port-access lldp-group <LLDP-group-name> Switch(config-lldp-group)# vlan <VLAN-ID>
• B.Switch(config)# port-access role <role-name> Switch(config-pa-role)# vlan access <VLAN-ID>
• C.Switch(config)# vlan <VLAN-ID> Switch(config-vlan-<VLAN-ID>)# voice
• D.Switch(config)# vlan <VLAN-ID> voice

Show Answers

Answer:

Question No : 8
What is correct regarding policy-based routing?

• A.Policies can only be applied to routed interfaces.
• B.Policies can be applied inbound and outbound.
• C.Monitoring of policy interfaces occurs every 60 seconds.
• D.Policy actions include routing permitting or dropping traffic.

Show Answers

Answer:

Question No : 9
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies for both wired and wireless traffic.
Which solution should the company implement?

• A.RADIUS dynamic authorization
• B.Downloadable user roles
• C.IPSec
• D.User-based tunneling

Show Answers

Answer:

Question No : 10
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit.
How should the administrator purchase and/or install the NetEdit solution?

• A.Install as a hardware appliance
• B.Installed on a supported version of RedHat Enterprise Linux
• C.Installed in a virtualized solution by using the Aruba-supplied OVA file
• D.Installed on a supported version of Debian Linux

Show Answers

Answer: