H31-321 Questions And Answers
$139
Exam Name: Huawei Certified Network Professional-MSTP Transmission
Updated: 2020-07-11
Q & A: 150
- Reviews
-
Roger GregasJan 03,2019Previously I was very nervous about my H31-321-ENU exam test wiped off this stress by providing me with a complete guidance regarding H31-321-ENU exam.
-
Willian MunizDec 24,2018I have passed this H31-321 exam with the updated dumps you sent to me.Thanks a lot.
-
Deandre VanzantenDec 23,2018I have passed this H31-321 exam with the updated dumps you sent to me.Thanks a lot.
Customers who bought this item also bought
PassQuestion offers valid H31-321 exam questions and answers to ensure you pass Huawei H31-321 Huawei Certified Network Professional-MSTP Transmission exam.
Q1.Are all PassQuestion H31-321 Q&As real?
PassQuestion H31-321 Questions and answers are written by professional experts and valid for practice your exam.
Q2.How many questions in PassQuestion H31-321 exam Q&As?
There are 150 Questions and answers which are all valid for real Huawei H31-321 exam.
Q3.How can I check the status of H31-321 payment?
Please enter the member center to check your status of payment.
Q4.What format can I get for PassQuestion H31-321 Q&As?
Please understand, H31-321 is PassQuestion special product. We only provide H31-321 software to help you touch real H31-321 exam environment. If do not know how to use PassQuestion software, just visit software page to get details.
Q5.How many pcs can I install my H31-321 software?
You can install your H31-321 software on two pcs. After you installed your H31-321 software, it will appear you a serial, please copy the serial to us, we will generate a registration code for you. As a rule, we can offer you two registration codes to help you use H31-321 software on two pcs.
Q6.Can I get free demo for checking before purchasing PassQuestion H31-321 exam Q&As?
Yes, of course, please contact PassQuestion online chat or mail to get free demo questions.
Q7.What about the refund policy and how to get my refund?
PassQuestion offers valid H31-321 questions and answers to ensure you pass, if failed, just scan your H31-321 exam report to (mail), we will check and give you full refund in time.
Q8.What is the process of refund?
We refund to your Paypal account and your Paypal will get the refund immediately. If you pay with your credit card then your Paypal will credit the payment to your credit card in 7 working days.
Q9.What is the period of free update?
PassQuestion offers one-year free update. If you find the number of your version is different from ours, please contact us by online chat and mail. We will send you the update at once.
Q10.Where Can I Get H31-321 Q&As After Completed Payment?
After you completed the payment, we will send the product to your mail in 10 mins in working time, 12 hours in non-working time. Never miss, please do not worry.
Working time:
GMT+8: Monday- Saturday 8:00 AM-18:00 PM
GMT: Monday- Saturday 0:00 AM-10:00 AM
Question No : 1
When dual BITS is configured, if two clock sources have the same level, then what will happen after clock protection switching?
A. Network element can not track the clock
B. Clock protection switching occurs frequently
C. Network element reports alarm of clock signal loss
D. The generation of pseudo-synchronization phenomenon
A. Network element can not track the clock
B. Clock protection switching occurs frequently
C. Network element reports alarm of clock signal loss
D. The generation of pseudo-synchronization phenomenon
Answer: D
Question No : 2
SNCP protection mechanism is the "Received double election." For the SNCP ring and SCNP ring, cross-ring business in the tangent point needs to be selected and then dual-transmitter, in theory, for the two-way cross-ring business at the tangent point, we have to configure four pairs of dual-transmitter,4 pairs of selective transceiver business.
A. True
B. False
A. True
B. False
Answer: B
Question No : 3
About clean dust screen, which is correct? (Multiple choice)
A. General dust screen can be directly pulled out
B. Paste the sponge on the dust shield can not be torn directly after the water rinse
C. After the cleaning process is complete, reattach the sponge to the dust shield
D. Cleaning the dust screen is usually 6 months at a time.
A. General dust screen can be directly pulled out
B. Paste the sponge on the dust shield can not be torn directly after the water rinse
C. After the cleaning process is complete, reattach the sponge to the dust shield
D. Cleaning the dust screen is usually 6 months at a time.
Answer: AC
Question No : 4
Which of the following description about the equipment loopback operation is wrong?
A. Software loopback: through the network management, the command line setup loopback
B. Hardware loopback: use the pigtail, self-loop cable for loopback operation on the optical interface, electrical port
C. The optical/electrical interface location of loopback in software and loopback in hardware are the same, while the signal flow is the same
D. The software loopback is automatically relieved in 5 minutes, and some of the boards do not support software loopback
A. Software loopback: through the network management, the command line setup loopback
B. Hardware loopback: use the pigtail, self-loop cable for loopback operation on the optical interface, electrical port
C. The optical/electrical interface location of loopback in software and loopback in hardware are the same, while the signal flow is the same
D. The software loopback is automatically relieved in 5 minutes, and some of the boards do not support software loopback
Answer: C
Question No : 5
SNCP ring and SNCP ring intersection networking, any one intersection point network elements failure or any two fiber-broken, the business can be protected.
A. True
B. False
A. True
B. False
Answer: B
Question No : 6
Outbound subnet business refers to the physical topology is the ring chain, the business node from the ring to reach the node on the chain.
A. True
B. False
A. True
B. False
Answer: B
Question No : 7
In ECC communication model, the media access layer is responsible for the establishment and maintenance of MAC connection between adjacent network elements, where the MAC refers to the physical MAC address of the network element.
A. True
B. False
A. True
B. False
Answer: B
Question No : 8
Which of the following protocols is used to set up and delete an LSP in an ASON network?
A. LMP
B. OSPF-TE
C. RSVP-TE
D. CSPF
A. LMP
B. OSPF-TE
C. RSVP-TE
D. CSPF
Answer: C
Question No : 9
NG-SDH equipment, if there is no alarm on the current port, you can set the alarm inversion on the port. The mode is manual recovery mode.
A. True
B. False
A. True
B. False
Answer: A
Question No : 10
Which of the following is the TU-PTR pointer value in the case of no frequency difference and phase difference?
A. 0
B. 70
C. 522
D. 32
A. 0
B. 70
C. 522
D. 32
Answer: B
Question No : 11
From path forming conditions, path end in the sub-board or subnet optical port or virtual network element, but the OSN1500/2500/3500 5.0 platform without subnet optical port concept.
A. True
B. False
A. True
B. False
Answer: B
Question No : 12
TU pointer adjustment is converted from the AU pointer adjustment.
A. True
B. False
A. True
B. False
Answer: A
Question No : 13
For the extended SSM protocol, clock ID setting principles. Which of the following statement is true? (Multiple choice)
A. All external BITSs are assigned a clock ID
B. All internal clock sources with external BITS nodes are assigned a clock ID
C. All the nodes internal clock sources that enter into another ring network from the chain or the ring network are assigned a clock ID
D. All the nodes that enter into another ring network from the chain or the ring network, If there is a ring line clock source in the clock trace level, the line clock source of the incoming ring should be assigned a clock ID, for example, the clock ID is set to 16.
A. All external BITSs are assigned a clock ID
B. All internal clock sources with external BITS nodes are assigned a clock ID
C. All the nodes internal clock sources that enter into another ring network from the chain or the ring network are assigned a clock ID
D. All the nodes that enter into another ring network from the chain or the ring network, If there is a ring line clock source in the clock trace level, the line clock source of the incoming ring should be assigned a clock ID, for example, the clock ID is set to 16.
Answer: ABC
Question No : 14
Which of the following are possible reasons of TPS protection switching failure? (Multiple choice)
A. Protection group parameter configuration is wrong
B. Protect the board from failure
C. Intersection board failure
D. Main control board failure
A. Protection group parameter configuration is wrong
B. Protect the board from failure
C. Intersection board failure
D. Main control board failure
Answer: ABC
Question No : 15
Which one of the following is the default network elements user name when creating network elements on the OptiX OSN 3500 line single station measurement using the NMS network management (U2000)?
A. admin
B. root
C. szhw
D. Ict
A. admin
B. root
C. szhw
D. Ict
Answer: B
Willian Muniz
I have passed this H31-321 exam with the updated dumps you sent to me.Thanks a lot.
Deandre Vanzanten
I have passed this H31-321 exam with the updated dumps you sent to me.Thanks a lot.
Augustine Tribue
When i seat for HCNP-Transmission H31-321 exam, i found that some answers are in different order in the real exam.so you can memorize all the correct answers.
Jules Keelin
When i seat for HCNP-Transmission H31-321 exam, i found that some answers are in different order in the real exam.so you can memorize all the correct answers.
Sammie Neal
Wonderful. I just passed H31-321,good luck to you.
Andy Delehoy
Thank you so much guys. Thank you for the great H31-321 training materials. Everything goes well. This update version is valid.
Hyman Reta
I eventually passed H31-321-ENU in first attempt and now I feel proud to say that I am HCNP-Transmission certified
Norberto Roehrman
HCNP H31-321-ENU software are very helpful I have used which covering the whole chapter in such a way, that there is no reason to leave any topic.
Shayne Bradrick
138 questions are valid for HCNP H31-321-ENU exam to pass! Thanks a lot.
Isaiah Savko
Took HCNP-MSTP Transmission H31-321-ENU exam today and passed. Used H31-321-ENU dumps file and found that around 10 - 15 of the questions are new.
Lee Desvergnes
Passed HCNP H31-321-ENU exam!! Thank you for your PassQuestion help. So helpful.
Stuart Steitz
I recommend H31-321-ENU exam questions. Your valid H31-321-ENU exam questions are up to date and their answers are accurate. Thank you.
Malik Whobrey
Passed HCNP H31-321-ENU exam test without any effort with your exam material. Thanks.
Roger Gregas