Test Online Free Cisco 350-601 Exam Questions and Answers
Practice a live sample before buying full access. This page keeps the free 350-601 question set organized by page so visitors and search engines can reach the canonical -questions.html URL directly.
DRAG DROP
Drag and drop the technologies from the left onto the description on the right.
Answer:
Question 77Selectable Answer
Which two features are used to allow a nondisruptive upgrade for the ISSU process? (Choose two.)
Answer:
Question 78Selectable Answer
An engineer must perform backup and restore of the Cisco UCS Manager configuration. The configuration must be stored on a remote server via XML encoding. The backup must store the configurations of the chassis. FEX, rack servers. lOMs, and blade server.
Which set of actions accomplishes these goals?
Answer:
Question 79Selectable Answer
Cisco Nexus 9000 Series Switches are configured with LACP protocol and default aging timers.
What is the impact on the LACP peer during an ISSU upgrade?
Answer: Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0110.html
ISSU and ungraceful switchovers are not supported with LACP fast timers.
Question 80Selectable Answer
What is the format of this output?
Answer:
Question 81Written Answer
DRAG DROP
A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. It should be used for mapping between VLAN 600 and VSAN 6.
Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.
Answer:
Explanation:
Graphical user interface, text
Description automatically generated
Question 82Selectable Answer
Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch.
Which two technologies can be implemented to reduce disruptions to the network during the upgrade? (Choose two.)
Answer:
Question 83Selectable Answer
Refer to the exhibit.
The MDS-EDGE-Switch and MDS-Core-Switch are configured with NPV and NPIV features The FLOGI from Cisco UCS is received by the MDS-Core-Switch on interface fc1/2. An engineer tried to move all traffic between the MDS-EDGE-Switch and MOS-Core-Switch from interface fc 1/2 to fc1/3, but the attempt failed.
Which set of actions completes the configuration?
Answer:
Question 84Selectable Answer
Which server policy is used to install new Cisco IMC software on a server?
Answer: Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_01.html#
You can use host firmware packages by defining a host firmware policy as an attribute of a service profile template, which is an updating template. Any change made to the service profile template is automatically made to its instantiated service profiles. Subsequently, the servers associated with the service profiles are also upgraded in parallel with the firmware version.
Graphical user interface, text, application
Description automatically generated
Question 85Selectable Answer
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch.
What is the destination IP address of the vPC keepalive packets that are sent by the switch?
An engineer must affirm the identity of the Cisco UCS Manager after a valid CA-signed keyring for HTTPS access is created.
Which action completes the configuration?
Answer:
Question 87Selectable Answer
Refer to the exhibit.
Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12.
Which two commands are needed to complete the configuration? (Choose two.)
Which two components are used by the Cisco Nexus switches telemetry process? (Choose two)
Answer:
Question 89Selectable Answer
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database.
Which two features must be enabled to accomplish this goal? (Choose two.)
Answer: Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/psec.html
Port Security Activation By default, the port security feature is not activated in any switch in the Cisco MDS 9000 Family. By activating the port security feature, the following apply: Auto-learning is also automatically enabled, which means: From this point, auto-learning happens for the devices or interfaces that were already logged into the switch and also for the new devices will login in future. You cannot activate the database until you disable auto-learning. All the devices that are already logged in are learned and are added to the active database. All entries in the configured database are copied to the active database. After the database is activated, subsequent device login is subject to the activated port bound WWN pairs, excluding the auto-learned entries. You must disable auto-learning before the auto-learned entries become activated.
Question 90Selectable Answer
Refer to the exhibit.
A network engineer is configuring the Smart Call Home feature on a Cisco Nexus Series Switch. An email must be generated that contains the last 100 lines of the log every time a new piece of hardware is inserted into the chassis.
Which command must be added to the configuration to receive the email?
