Practice Free Cisco 350-601 Exam Questions Online, 350-601 Free Demo

Question 61 Selectable Answer

An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted.
Which command should be used to meet these requirements?

A. Idap-server host 10.10.2.2 enable-ssl
B. Idap-server 10.10.2.2 port 443
C. Idap server host 10.10.2.2 key SSL_KEY
D. Idap-server 10.10.2.2 key SSL_KEY

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/cradtac1.html

Question 62 Selectable Answer

Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?

A. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.
B. The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.
C. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.
D. FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/UF_FCoE_final.html#wp1154912

Question 63 Selectable Answer

A network engineer must deploy a configuration backup policy to the Cisco UCS Manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol.
Which configuration backup settings meet these requirements?

A. Type: All Configuration Protocol: SCP
B. Type: Logical Configuration Protocol: SFTP
C. Type: Full State Protocol: FTP
D. Type: System Configuration Protocol: TFTP

Answer:

Question 64 Selectable Answer

An engineer changed a configuration and must perform a rollback.
Which statement applies to a Cisco Nexus 5600 Series switch?

A. Errors are skipped when an atomic rollback type is triggered.
B. A user who is assigned to the network-operator user role can perform a rollback.
C. The configuration rollback functionality is disabled when FCoE is enabled.
D. A system checkpoint is generated automatically when the running configuration is saved to NVRA

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/503_n1_1/cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf
https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/503_n1_1/cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf&ved=2ahUKEwjQ8ubTuK3xAhWm3jgGHZ9gB0oQFjAAegQIBRAC&usg=AOvVaw2j0nnvXiChAoVooxX2Qx0g

Question 65 Selectable Answer

An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment.
Which two policies must be configured to meet these requirements? (Choose two.)

A. Boot Policy
B. Global Policy
C. Power Control Policy
D. Maintenance Policy
E. Reboot Policy

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_01011.html

Question 66 Selectable Answer

An engineer is implementing FCoE.
Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?

A. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
B. It always is enabled on 10/100-Mbps native Ethernet ports.
C. It provides the authentication of peers on the Cisco Nexus switch.
D. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.

Answer:
Explanation:
The Data Center Bridging Exchange Protocol (DCBXP) is an extension of LLDP. It is used to announce, exchange, and negotiate node parameters between peers.
DCBXP parameters are packaged into a specific DCBXP TLV. This TLV is designed to provide an acknowledgement to the received LLDP packet. DCBXP is enabled by default, provided LLDP is enabled. DCBXP is disabled on ports where LLDP transmit or receive is disabled.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/layer2/503_n2_1/b_Cisco_n5k_layer2_config_gd_rel_503_N2_1/b_Cisco_n5k_layer2_config_gd_rel_503_N2_1_chapter_01110.html

Question 67 Selectable Answer

Refer to the exhibit.

A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches.
Which command meets these requirements?

A. aaa authentication none
B. aaa authentication login default group radius
C. aaa authentication login default group local
D. aaa authentication login default fallback error local

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/cradtac1.html

Question 68 Selectable Answer

An engineer must configure a monitoring solution for a Cisco Nexus 9000 Series Switch based data center. The solution must provide real-time insight into the network health with subscription-based monitoring. The monitoring must be initiated from the client side, and the data must be sent via encryption.
Which configuration steps complete the configuration?

A. Option A
B. Option B
C. Option C
D. Option D

Answer:

Question 69 Selectable Answer

What is an advantage of NFS as compared to Fibre Channel?

A. NFS enable thin provisioning for LUNs.
B. NFS provides the dynamic allocation of storage capacity.
C. NFS removes the impact of IP overhead.
D. NFS provides direct access to the underlying storage hardware.

Answer:
Explanation:
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKINI-1011.pdf

Question 70 Selectable Answer

An engineer needs to connect Cisco UCS Manager to an external storage array. Due to budget limitations, the engineer must connect a Cisco UCS manager directly to an FC storage port.
Which two actions must be taken to complete this connection? (Choose two)

A. Configure the fabric interconnect in FC switch mode
B. Create a storage connection policy
C. Set FC zoning to disabled when creating the VSAN
D. Configure the fabric interconnect in end host mode
E. Create the required VSAN in the SAN cloud

Answer:

Question 71 Selectable Answer

An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers.
The primary VLAN is present, But the secondary VLAN must Be added to Both fabrics.
Which configuration set accomplishes this task?

A. Option A
B. Option B
C. Option C
D. Option D

Answer:

Question 72 Written Answer

DRAG DROP
Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
• R1 must be the active RP.
• R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Answer:

Explanation:

Graphical user interface, text, application
Description automatically generated

Question 73 Selectable Answer

Which virtual MAC address is the default for HSRP version 2 group 10?

A. 0000.5E00.0110
B. 0000.0C9
C. F00A
D. 3716.1350.1C0A
E. 0000.0C9
F. F010

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-hsrp-v2.html

Question 74 Selectable Answer

An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity.
What configuration should be implemented?

A. Option A
B. Option B
C. Option C
D. Option D

Answer:
Explanation:
Reference: https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/nxos/commands/l2/spanning-tree-bpduguard.html#:~:text=To%20enable%20bridge%20protocol%20data,no%20form%20of%20this%20command.

Question 75 Written Answer

DRAG DROP
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch.
Drag and drop actions from the left into the order on right

Answer:

Explanation:
Graphical user interface, table
Description automatically generated with medium confidence

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/fabric/nx-os/nx_os_fabric/zone.html

Test Online Free Cisco 350-601 Exam Questions and Answers