Question No : 1
Exhibit:



An administrator is attempting to map an iSCSI LUN to a Windows 2012 host, but the windows host fails to discover the iSCSI targets.
Referring to the exhibit, what is the connectivity problem?

• A.The iSCSI service is running on svm1, but iSCSI is not licensed on the nodes.
• B.The iSCSI LIFs are not currently on their home port.
• C.The iSCSI LIFs are currently disabled.
• D.The LIFs do not have a failover group defined.

Show Answers

Answer:

Question No : 2
While expanding a 200 GB LUN in an ONTAP 9.4 system, the following error is observed:



What is the cause of this error?

• A.The volume auto-grow is disabled.
• B.The LUN reached maximum capacity.
• C.The LUN can be expanded up to 10 times its original size.
• D.Space reservation is enabled.

Show Answers

Answer:

Question No : 3
You want to provision an iSCSl LUN.
Which two steps are required to accomplish this task? (Choose two.)

• A.Add the initiator IP address to the igroup.
• B.Map the LUN to the igroup.
• C.Add the target WWPN to the igroup.
• D.Add the initiator 1QN to th«t igroup.

Show Answers

Answer:

Question No : 4
Exhibit.



You are adding a boot LUN for a new server. The server uses FCP attached through a CNA. The ONTAP cluster is also attached to the same fabric by way of UTA2. You configure the zoning for the fabric as shown in the exhibit. You discover that the server cannot see its boot LUN.
What is the problem with your zoning configuration?
A. The zone set must have the same name as the zone.
B. The zone was not activated.
C. The zone used a wrong zone ID.
D. The WWPN for the NetApp LIF is incorrect.

Show Answers

Answer:D

Question No : 5
To collect per client NFS statistics on a storage system, the option nfs.per_client_stats.enablemust be set on.

• A.True
• B.False

Show Answers

Answer:

Question No : 6
On a Windows 2012 Server, the FC load balance policy is configured using which two utilities? (Choose two.)

• A.NetApp OnCommand System Manager
• B.Data ONTAP DSM for Windows MPIO
• C.Windows MPIO
• D.Unified Host Utilities

Show Answers

Answer:

Question No : 7
File locking for a CIFS client is ____.

• A.advisory
• B.mandatory
• C.ordered
• D.optional

Show Answers

Answer:

Question No : 8
Which formula is appropriate for calculating target port Queue Depth?

• A.The number of LIFs using a physical port * 256
• B.The sum of the Queue Depth setting for all hosts using a physical port
• C.The number of LIFs using the physical port * Maximum Host HBA Queue Depth setting
• D.The number of physical ports * 2048

Show Answers

Answer:

Question No : 9
You are asked to provision a 500 GB FC LUN to a 4-node ESXi cluster. Each ESXi host is configured with a dual port FC HBA that is cabled into a pair of FC switches which are configured in a standard dual fabric configuration.
After you create the LUN, which objects must be added to the igroup to map the LUN to the ESXi cluster?

• A.eight ESXi host WWPNs
• B.eight ESXi IQNs
• C.eight ESXi host WWNNs
• D.eight ESXi host FCIDs

Show Answers

Answer:

Question No : 10
You have a 4-node FAS8040 cluster licensed for FCP and iSCSI. Each node has both FC and iSCSI LIFs.
One of your Windows 2012 Servers has a single 8Gb FC port and a single 10 Gb Ethernet port with switched connectivity to the FC and Ethernet ports on the cluster. You need to use both ports on the host for multipath access to a LUN on the NetApp cluster.
What will accomplish this task?

• A.NetApp Data ONTAP DSM for Windows MPIO
• B.FCoE HBA
• C.iSCSI HBA
• D.native Windows MPIO

Show Answers

Answer: