New Cisco CCNP Enterprise 300-425 ENWLSD Exam Questions

  Edina  03-14-2020

300-425 Designing Cisco Enterprise Wireless Networks v1.0 exam is new Cisco exam associated with the CCNP Enterprise and Cisco Certified Specialist - Enterprise Wireless Design certifications. PassQuestion new released Cisco CCNP Enterprise 300-425 ENWLSD Exam Questions which contains 61 questions and answers to help you pass your Cisco 300-425 exam successfully and get your CCNP Enterprise certification in an easy way.

Requirement For CCNP Enterprise Certification - a core exam and an enterprise concentration exam

To earn CCNP Enterprise, you pass two exams: a core exam and an enterprise concentration exam of your choice. And every exam in the CCNP Enterprise program earns an individual Specialist certification, so you get recognized for your accomplishments along the way. The core exam is 350-401 ENCOR Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR),300-425 ENWLSD is a enterprise concentration exam that you can take to achieve your CCNP Enterprise Certification. 

What Covered Are Covered In CCNP Enterprise 300-425 ENWLSD Exam?

1.0 Wireless Site surveys
1.1 Collect design requirements and evaluate constraints

  • 1.1.a Client density
  • 1.1.b Real time applications
  • 1.1.c AP type
  • 1.1.d Deployment type (data, location, voice, video)
  • 1.1.e Security

1.2 Describe material attenuation and its effect on wireless design
1.3 Perform and analyze a Layer 1 site survey
1.4 Perform a pre-deployment site survey
1.5 Perform a post deployment site survey
1.6 Perform a predictive site survey
1.7 Utilize planning tools and evaluate key network metrics (Ekahau, AirMagnet, PI, Chanalyzer, Spectrum Analyzer)

2.0 Wired and Wireless Infrastructure
2.1 Determine physical infrastructure requirements such as AP power, cabling, switch port capacity, mounting, and grounding
2.2 Determine logical infrastructure requirements such as WLC/AP licensing requirements based on the type of wireless architecture
2.3 Design radio management

  • 2.3.a RRM
  • 2.3.b RF profiles
  • 2.3.c RxSOP

2.4 Apply design requirements for these types of wireless networks

  • 2.4.a Data
  • 2.4.b Voice and video
  • 2.4.c Location
  • 2.4.d Hyperlocation

2.5 Design high-density wireless networks and their associated components (campus, lecture halls, conference rooms)
2.6 Design wireless bridging (mesh)

  • 2.6.a Modes of operation
  • 2.6.b Ethernet bridging
  • 2.6.c WGB and roaming

3.0 Mobility
3.1 Design mobility groups based on mobility roles
3.2 Optimize client roaming
3.3 Validate mobility tunneling for data and control path

4.0 WLAN high availabilit
4.1 Design high availability for controllers

  • 4.1.a Network availability through LAG
  • 4.1.b Stateful Switchover (SSO)
  • 4.1.c Anchor controller priority and redundancy

4.2 Design high availability for APs

  • 4.2.a AP prioritization
  • 4.2.b Fall-back (assigning primary, secondary, and tertiary)

View Online 300-425 ENWLSD Free Questions Selected From PassQuestion 300-425 ENWLSD Full Questions

1.A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)

A. Use a battery pack to power APs
B. Use a drawing of the office space to draw AP and client placements.
C. Use DoS attack on APs while measuring the throughput.
D. Use APs with directional antennas.
E. Use APs with external antennas.
F. Use APs with built-in antennas.
Answer: ABF

2.Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
A. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
B. UDP 16668 for control plane, UDP 16667 for data plane
C. UDP 16667 for control plane, UDP 16666 for data plane
D. UDP 16666 for control plane, UDP 16667 for data plane
Answer: D

3.A customer asks an engineer to explain the concept of mobility domains and mobility groups.
Which statement does the engineer respond with?

A. A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLC are in the same mobility domain.
B. If WLCs are in the same mobility domain, they communicate with each other but, if an anchor WLC is present it must be in the same mobility domain for communication to be possible.
C. If WLCs are in the same mobility domain, they communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
D. WLCs do not need to be in the same mobility domain to communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
Answer: C

4.An engineer is designing a wireless deployment for a university auditorium.
Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)

Answer: CE

5.A wireless engineer is designing a wireless network to support real-time applications over wireless.
Which IEEE protocol mus the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?

A. 802.11w
B. 802.11r
C. 802.11i
D. 802.11k
Answer: D

6.A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe.
Which concern must addressed?

A. Some channels may not be available consistently across the organization.
B. Different RF policies per office are not available in this configuration.
C. Syslog must be configured to the time-zone of the NMS platform.
D. Centralized controllers cannot uniformly authenticate global users.
Answer: C

7.An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol.
Which protocol must the engineer select?

A. 802.11i
B. 802.11ac
C. 802.11r
D. 802.11e
Answer: C

8.A high-density wireless network is designed.
Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?

A. Band Select
C. Cisco Centralized Key Management
D. load balancing
Answer: A

Leave And reply:

  TOP 50 Exam Questions