D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam Questions

  Edina  01-17-2024

D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam is newly available replacement of DES-4421 exam. To ensure that you are well-prepared for this exam, we have curated a comprehensive collection of the latest D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam Questions. These questions cover a wide range of topics and have been carefully selected to mirror the content and format of the actual exam. By utilizing our D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam Questions, you can confidently prepare for the exam and enhance your chances of success. 

Dell PowerEdge MX Modular Deploy 2023

This exam is designed to assess your knowledge and skills in effectively configuring, managing, and resolving issues with Dell PowerEdge MX systems. By successfully completing this certification, you demonstrate your proficiency in performing intermediate-level tasks such as configuring, installing, managing, upgrading, and troubleshooting Dell PowerEdge MX server products.

Part 1:
During this section of the exam, you will have 75 minutes to answer a total of 39 questions. It is important to achieve a minimum score of 63% in order to pass.

Part 2:
In the second part of the exam, you will have 45 minutes to complete 9 simulations. These simulations will test your ability to apply your knowledge and skills in real-world scenarios. To successfully pass this section, you must achieve a minimum score of 66%.

Please note that in order to obtain this certification, it is required to pass both parts of the exam.

Exam Topics

MX-Series Features (27%)

• Describe MX7000 hardware chassis components and numbering schemes
• Compare MX740c/MX750c/MX760c compute sleds and features
• Describe the 1U versus 2U sleds
• Describe MX5016s storage sleds and configurations
• Describe the features of 16G (DDR5, E3 storage, PERC, BOSS-N1, and CAC/PIV)
• Describe network switches and/or I/O fabric
• Describe the ATMOS components

MX7000 Administration (29%)

• Identify the MX Chassis Management Architecture and define the multichassis management groups
• Describe key features of OME-M that support management of the MX7000 chassis
• Configure storage sled management, mapping drives, and drive/enclosure assigned configuration
• Compare the internal storage versus using Fabric C with external storage
• Describe use of slot profiles, creating logs, and the iDRAC Service Module
• Describe how to perform firmware updates with the catalog
• Use key features of iDRAC specific to MX Modular (e.g., resetting iDRAC.
• Describe the main features of Lifecycle Controller

MX7000 Installation (17%)

• Describe the infrastructure and out-of-the-box setup on an MX7000
• Describe the power-on options
• Employ the Chassis Deployment Wizard to configure the initial chassis.
• Deploy server templates

MX7000 Implementation (19%)

• Identify hardware requirements of the various MX7000 network configurations (e.g., network cards, switches)
• Implement the Fabric Expander Module with the in-chassis network switch
• Understand the relationship between the Fabrics in Chassis Management Groups and Chassis backup lead
• Describe the initial switch set-up requirements
• Understand the SmartFabric Architecture
• Describe the VLAN Scale and L2 multicast Operation

MX7000 Troubleshooting (8%)

• Understand MX7000 troubleshooting (e.g., Minimum to POST and alerts)
• Understand the MX7000 troubleshooting logs
• Describe the Left Control Panel LCD PIN Management and/or Right Control Panel Field Replacement Auto-configuration

View Online Dell PowerEdge MX Modular Deploy 2023 D-PEMX-DY-23 Free Questions

1. In SmartFabric mode, what is the recommended maximum number of VLANs per server port on an MX7000 switch?
A. 256
B. 512
C. 1024
D. 1536
Answer: B
2. When a SAS IOM is power cycled, how much time does it take for the storage-IOM to display mapping information?
A. 300 seconds
B. 400 seconds
C. 500 seconds
D. 600 seconds
Answer: A
3. To which component can a firmware update be applied without affecting any applications running on the server?
B. RAID Controller
Answer: D
4. How are double-width compute sleds on the MX7000 numbered from the front?
A. As 1, 3, 5, and 7, top to bottom
B. From 1 to 8, left to right
C. As 1, 3, 5, and 7 left to right
D. From 1 to 8, top to bottom
Answer: C
5. A customer would like to periodically change the iDRAC root password on all the servers in their MCM Group. What feature in OME-M should they use?
A. Quick Deploy
B. Resource Pools
C. SupportAssist
D. Chassis Deployment Wizard
Answer: A
6. An administrator is receiving notifications about insufficient power for a PowerEdge MX7000 chassis. The chassis is fed from two different power grids.
What is the best policy to maximize power and maintain uptime?
A. PSU Pairing
B. Grid Redundancy
C. PSU Redundancy
D. No Redundancy
Answer: D
7. Which ports will be active in an MX9116n FSE if there are dual-port NICs in all the server sleds?
A. server-facing ports 1–8
B. server-facing ports 9–16
C. odd-numbered server-facing ports
D. even-numbered server-facing ports
Answer: C
8. A system administrator wants to disable Lockdown Mode. Which interface should be used?
A. iSM Interface
C. TPM Interface
Answer: B
9. What type of power cord connects to the PSU side of a PowerEdge MX7000?
A. C13
B. C15
C. C15
D. C21
Answer: D
10. A customer wants to change the switch operating mode from SmartFabric mode to Full Switch mode. After deleting the fabric in OME-M, what configuration is retained on the switch?
A. admin password, hostname, management IP Address, and the VLT domain configuration
B. admin password, hostname, and management IP Address
C. admin password, hostname, management IP Address, and all port breakout configuration
D. admin password, hostname, management IP Address, and the VLAN database
Answer: B

Leave And reply:

  TOP 50 Exam Questions