Question No : 1
A network administrator monitors an Aruba Mobility Controller with Aruba AirWave and sees the configuration status is Error.
What should the administrator conclude?

• A.AirWave checks the controller configuration and detects a syntax error.
• B.AirWave determines that the controller configuration does not match the template for its group.
• C.AirWave has a communication issue with the controller and cannot check the configuration.
• D.AirWave detects a mismatch with the controller configuration and software version.

Show Answers

Answer:

Question No : 2
What is a key difference between an Aruba Air Monitor (AM) and an Aruba Spectrum Analyzer (SA)?

• A.An AM detects threats such as rogue APs, while an SA analyzes RF conditions.
• B.An AM detects rogue APs and provides data services to clients, while an SA only detects rogue APs.
• C.An AM scans on only one 802.11 frequency band, while an SA scans on both 802.11 frequency bands.
• D.An AM both detects wireless intrusion attempts and mitigates them, while an SA only detects wireless intrusion attempts.

Show Answers

Answer:

Question No : 3
Refer to the exhibit.



Based on the exhibit, what is the maximum number of APs that this Mobility Master (MM) solution can support?

• A.0
• B.1
• C.32
• D.500

Show Answers

Answer:

Question No : 4
Which task can an Aruba Air Monitor (AM) perform?

• A.Analyze wireless traffic patterns at the application level.
• B.Optimize RF through the AP channel and transmit power plans.
• C.Analyze RF signals to determine the cause of non-802.11 interference.
• D.Help to detect rogue APs in the environment.

Show Answers

Answer:

Question No : 5
Refer to the exhibits.
Exhibit 1



Exhibit 2



A company has a Mobility Master (MM)-based solution with a guest WLAN. Users can connect to the WLAN, but they receive the error shown browser rather than see login page. Exhibit 2 shows the status for one of the guest clients.
What is one issue that could cause the errors described?

• A.The firewall blocks DHCP traffic between the guest clients and the DHCP server.
• B.The DHCP pool for guests does not assign users a DNS server address.
• C.The MM and Mobility Controllers (MCs) have invalid certificates.
• D.The Captive Portal is not enabled for the role to which these clients are assigned.

Show Answers

Answer:

Question No : 6
What is an advantage for a network administrator to use AirWave over a Mobility Master (MM)?

• A.ability to gather and analyze historical user data, and monitor client association and network usage trends
• B.scans wireless client settings and brings those settings in compliance with corporate security policies.
• C.ability to monitor and manage a Mobility Controller (MC) to configure the WLAN
• D.provides realtime firewall hits for client network troubleshooting

Show Answers

Answer:

Question No : 7
Refer to the exhibit.



A network administrator needs to use Aruba AirWave to view statistics for an AP’s 802.11ac radio.
How can the administrator update the information on-demand rather than wait the typical interval?

• A.Click Poll Controller Now
• B.Click the 802.11ac link
• C.Log out of the interface and log back in
• D.Refresh the browser

Show Answers

Answer:

Question No : 8
A company plans to deploy a Mobility Master (MM) solution with two MM nodes. The MM solution will manage 20 Mobility Controller (MC) appliances that will control a total of 800 APs.
How should the network administrator install the AP licenses?

• A.40 AP licenses on the MM
• B.400 AP licenses on the MM
• C.800 AP licenses on each MC
• D.800 AP licenses on the MM and 40 AP licenses on each MC

Show Answers

Answer:

Question No : 9
When an Aruba solution uses AirMatch, which device generates the channel and power plan for an AP?

• A.the AirWave Management Platform
• B.the Mobility Master (MM)
• C.the Mobility Controller (MC) for the AP
• D.the AP itself

Show Answers

Answer:

Question No : 10
Refer to the exhibit.



The alias in the rule shown in the exhibit is network 10.1.1.0/24.
A wireless client is assigned IP address 10.1.2.10/24 and the “admins” role. The wireless client at 10.1.2.10 attempts to initiate a Web session with a server at 10.1.1.2. A wired client at 10.1.1.3 attempts to initiate an SSH session with the wireless client at 10.1.2.10.
How does the Aruba firewall handle these attempts?

• A.The firewall drops the traffic from the wireless client. The firewall drops the traffic from the wired client.
• B.The firewall permits the traffic from the wireless client, but drops the return traffic from the server. The firewall drops the traffic from the wireless client.
• C.The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall permits the traffic from the wired client and also permits the return traffic from the wireless client.
• D.The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall drops the traffic from the wired client.

Show Answers

Answer: