Question No : 1
Company A and Company B are merging their BGP routed networks. The companies have overlapping IP ranges and security concerns during the migration phase.
Which Aruba CX 8325 functionality would help the merging of networks in a secure way?

• A.Use of ACL's to separate the company networks at the VLAN level
• B.Use of Aruba Gateway appliance to control the routes between merged networks
• C.Use of vsf capable switch to integrate the routing
• D.Use of virtual route forwarding and BGP route leaking

Show Answers

Answer:

Question No : 2
When an ArubaOS-CX switch uses the temporary copy of the coring state database, how does NetEdit validate if the configuration is correct?

• A.Semantic validation
• B.Syntax validation
• C.Deploy validation
• D.Planned validation

Show Answers

Answer:

Question No : 3
(Scenarios may contain multiple errors which may or may not Impact the solution)
Refer to the exhibit.



An engineer has attempted to configure two pairs of switches in the referenced configuration, it is required to implement Multi-Chassis Link Aggregation for each pair of switches
The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows:
There is an error message staling "incompatible interface.".
Which interfaces are the cause of the error? (Select two.)

• A.1/1/12 10GBaseT SFP*+ 30m Cat6A Transceiver
• B.1/1/49 40G QSFP+ 15m Active Optical Cable
• C.1/1/13 10GBaseT SFP+ 30m Cat6A Transceiver
• D.1/1/48 iGBaseT 100m Cat5e Transceiver
• E.1/1/50 40G QSFP+ 15m Active Optical Cable

Show Answers

Answer:

Question No : 4
An administrator warns to create an ACL.
Permit traffic from 192.168.10, 65 through 192.168.10.94
Permit traffic from 192 168 10 104 through 192 16810.119
deny all other ip traffic
Which configuration is required to accomplish the administrator’s goals?
A)



B)



C)



D)

• A.Option A
• B.Option B
• C.Option C
• D.Option D

Show Answers

Answer:

Question No : 5
The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch.
Which statement Is true about access-list on the selected switch model?

• A.IPv4 and IPv6 entries can be used in one ACL with separate rules
• B.Separate IPv4 and IPv6 ACLs need to be created for inbound and outbound traffic
• C.Only one inbound or outbound ACL can be bound to an interface.
• D.Routed interfaces can have only inbound ACLs

Show Answers

Answer:

Question No : 6
The example ACL is used with Aruba CX 6400 switches to permit traffic to web servers configured on interface 1/1/1 inbound with IP 10.254.4.1/24.



How does this ACL affect the HTTPS traffic to destination 10.254.4.7 from a client 10.253.1.5 via interface 1/1/2 with IP 10 254.3.1/24?

• A.The ACL would be valid only if bound to 1/1/2 outbound.
• B.The implicit rule allows the traffic
• C.The implicit rules deny the traffic.
• D.The traffic is allowed when ACL is Pound to inbound traffic.

Show Answers

Answer:

Question No : 7
You have removed a member out of the ArubaOS-CX 6300 VSF configuration. The login to the removed member falls.
What is true about switch login recovery?

• A.The task requires physical access to the switch
• B.The zeroize task executes the zeroize.txt from the root of the CF card on the switch
• C.The zeroize task will remove all user passwords: the configuration remains on the switch
• D.The task can be executed remotely

Show Answers

Answer:

Question No : 8
Refer to the following configuration:



How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches? (Select two)

• A.Use NetEdit to replicate the configuration of QoS policies to all wired switches
• B.in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.
• C.With ClearPass and downloadable user roles, you can add QoS policies for user roles
• D.QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches

Show Answers

Answer:

Question No : 9
A customer is having a performance issue on the network and has received complaints about users experiencing Intermittent connectivity. After performing a packet capture, It is determined that there is unwanted UDP port 68 traffic being broadcast 6300W%wit
To mitigate this issue, which ArubaOS-CX 6300M switch feature would be best to implement?

• A.dhcpv4-snooping
• B.private-vlan
• C.bcms-optimization
• D.broadcast-limit

Show Answers

Answer:

Question No : 10
A customer is migrating from a Cisco VSS system to an ArubaOS-CX VSX cluster in order to provide default gateway functionality, the local network administrator creates VLAN interfaces. The network administrator then migrates successfully from Cisco to Aruba
The next day a manager asks if the solution is redundant. The network administrator realizes that there is no redundancy on the default gateway functionality
What is the preferred solution with the least amount of configuration and disturbance?

• A.Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure active gateway IP with the default gateway address on every VLAN interface on Doth switches
• B.For every VLAN Interface, configure a VRRP IP address with the same IP address as already present in the first VSX node. Configure this on both switches.
• C.Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure VRRP with the default gateway address as virtual IP-address per VLA
• D.For every VLAN interface, configure an active gateway IP with the same IP address as already present in the first VSX node Configure this on both switches

Show Answers

Answer: