Practice Free Cisco 300-810 Exam Questions Online, 300-810 Free Demo

Question 1 Selectable Answer

In the integration of Cisco Unity Connection using SIP, which SIP trunk security profile option is required for MWI to work correctly?

A. Accept out-of-dialog refer
B. Accept replaces header
C. Accept unsolicited notification
D. Accept presence subscription

Answer:
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/understanding-troubleshooting-mwi-on-unity-connection/ta-p/3162948
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/9_0_1/secugd/CUCM_BK_CCB00C40_00_cucm-security-guide-90/CUCM_BK_CCB00C40_00_cucm-security-guide_chapter_011001.pdf

Question 2 Selectable Answer

An engineer must configure a test user mailbox in a newly deployed Cisco Unity Express module.
Which console command set reflects the correct configuration in this scenario?
A)

B)

C)

D)

A. Option A
B. Option B
C. Option C
D. Option D

Answer:

Question 3 Selectable Answer

Which SAML component specifies the mapping of SAML assertion protocol message exchanges with standard messaging formats or communication protocols such as SOAP exchanges?

A. SAML binding
B. SAML assertion
C. SAML profiles
D. SAML protocol

Answer:
Explanation:
Reference: https://en.wikipedia.org/wiki/Security_Assertion_Markup_Language

Question 4 Selectable Answer

Refer to the exhibit.

An administrator troubleshoots push notifications, and Cisco TAC requests the trace files from the cluster.
From which location should the files be collected?

A. /var/log/active/cm/trace/cmas/log4j/
B. /var/log/active/cm/trace/ccm/log4j/
C. /var/log/active/imp/trace/cmas/log4i/ D: /var/log/active/cm/trace/ccmpns/og4j/

Answer:

Question 5 Selectable Answer

An engineer needs to configure calendar integration between Microsoft Exchange and a Cisco IM and Presence server. The engineer created the resource mailboxes and now needs to add impersonation.
Which command accomplishes this task using the Exchange Management Shell from Microsoft Exchange?

A. Option A
B. Option B
C. Option C
D. Option D

Answer:

Question 6 Selectable Answer

Refer to the exhibit.

Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion.
Which statement about this scenario is true?

A. Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.
B. Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.
C. These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.
D. The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/116637- trouble-jabber-00.html
Certificate Authority (CA), which is the case for a self-signed certificate, the certificate needs to be loaded into the client OS certificate store. Otherwise, Jabber users will be prompted to accept or decline individual server certificates when they initially connect.

Question 7 Selectable Answer

Which operating system is supported for smart card-based authentication on Jabber and Cisco UCM platforms?

A. Mac OS
B. Linux
C. Chrome OS
D. Windows

Answer:

Question 8 Selectable Answer

Which SSO authentication method requires no action from the user when the session token times out?

A. web form
B. smart card
C. external database
D. local authentication

Answer:

Question 9 Selectable Answer

Which statement about SIP federation between Cisco Unified Communications IM and Presence and Microsoft Skype for Business is true?

A. Add the federated user as a contact in Jabber to view its presence status.
B. The role of SIP Proxy service is to process the XMPP packet in from Jabber and convert it to SI
C. TLS is optional.
D. Use of directory URI as an IM addressing scheme is not supported.

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/12_5_1/cup0_b_interdomain-federation-1251/cup0_b_interdomain-federation- 1251_chapter_01000.html

Question 10 Selectable Answer

Which two Cisco Unity Connection logs are used to troubleshoot issues with Message Waiting Indicators? (Choose two.)

A. Connection Mailbox Sync
B. Connection Notifier
C. Connection Message Transfer Agent
D. Connection Conversation Manager
E. Connection IMAP Server

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg/b_11xcuctsg_chapter_0101.html#ID-2398-00000004

Question 11 Selectable Answer

Which dial-peer configuration routes calls from SIP-based phones on Cisco Unified Communications Manager Express to Cisco Unity Express?

A. dial-peer voice 7000 voip destination-pattern 7000 session protocol sipv2 session target ipv4: 10.3.6.127 codec g711alaw
B. dial-peer voice 7000 voip destination-pattern 7000 session protocol sipv2 session target ipv4: 10.3.6.127 codec ilbc
C. dial-peer voice 7000 voip destination-pattern 7000 session protocol sipv2 session target ipv4: 10.3.6.127 codec g711ulaw
D. dial-peer voice 7000 voip destination-pattern 7000 session protocol sipv2 session target ipv4: 10.3.6.127 codec g729r6

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity-express/62609- tdcmecue.html

Question 12 Selectable Answer

Which CLI command is used to collect traces from the Cisco Presence engine for seven days?

A. file build log cisco_presence_engine 7
B. file build log cisco_presence 168
C. file build log presence_engine 7
D. file build log presence_engine 168

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/12_0_1/cup0_b_config-admin-guide-imp-1201/cup0_b_config-admin-guide-imp- 1201_chapter_010101.html

Question 13 Selectable Answer

A collaboration engineer wants to stop fraudulent calls to the PSTN that are being made through Cisco Unity Connection Cisco Unity Connection is integrated with Cisco UCM via the SCCP protocol.
Which action accomplishes this goal?

A. Change the Rerouting CSS on the trunk to Cisco Unity Connection
B. Change the CSS of the voicemail port
C. Change the configuration of the routing rule
D. Remove values from the restriction table

Answer:

Question 14 Selectable Answer

A jabber user reports that they receive pop-up windows warring about untrusted certificates when they attempt to log in to jabber without receiving the certificate warnings.
Which two actions resolve this issue? (Choose two.)

A. Add the certificates to the client machine’s local certificate store or keychain
B. Reinstall the Jabber client using the /quiet option
C. Configure Jabber with the INVALID_CERTIFICATE_BEHAVIOR option set to “RejectAndNotify.”
D. Replace self-signed certificates with certificates signed by a CA
E. Move the user to a different Presence Redundancy Group

Answer:

Question 15 Selectable Answer

When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?

A. 30 minutes
B. 10 minutes
C. 20 minutes
D. 60 minutes

Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-im-presence-service/200958-IM-and-Presence-Server-High-Availability.html
Automatic Fallback
Automatic fallback takes place when the server monitors the services and the Server Recovery Manager (SRM) service will automatically fallback users to their homed nodes. The key in this configuration is that the Server Recovery Manager (SRM) service will wait 30 minutes for a failed service/server to remain active before an automatic fallback is initiated. Once this 30 minute up time is established, user sessions are moved back to their homed nodes. The Jabber client will apply the re-log in upper and lower limits for the fallback. Automatic fallback is not the default configuration, but it can be enabled. To enable automatic fallback, change the Enable Automatic Fallback parameter in the Server Recovery Manager Service Parameters to value True.

Test Online Free Cisco 300-810 Exam Questions and Answers