Practice Free Cisco 300-615 Exam Questions Online, 300-615 Free Demo

Question No : 1
Refer to the exhibit.

A network engineer has connected the Nexus switch management port to the Internet using DHCP to allow the Guest shell running on the switch to download Python packages. The engineer can ping google.com successfully from the Nexus switch, but the Guest shell failed to download any Python packages.
Which action resolves the problem?

A.Update the Python packages on the Cisco Nexus switch directly.
B.Manually configure DNS in the Guest shell, even if it is claimed on the Cisco Nexus switch through DHC
C.Manually configure NTP in the Guest shell.
D.Connect Guest shell to data plane interfaces to be able to connect to the networks outside the Cisco Nexus switch.

Answer:

Question No : 2
Refer to the exhibit.

An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues.
Which action resolves the issue?

A.Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
B.Set the local group number as 300 in the remote data center configuration
C.Run version 1 and version 2 HSRP on VLAN300 in the local data center.
D.Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.

Answer:
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.pdf

Question No : 3
Refer to the exhibit.

An upgrade operation fails with an error displayed.
Which action resolve the issue?

A.Use a different system image
B.Use a different kickstart image
C.Allocate extra space on a flash drive to extract a kickstart image
D.Allocate extra space on a flash drive to extract a system image

Answer:
Explanation:
Kickstart image verification succeeded. System image has failed.

Question No : 4
Refer to the exhibit.

An engineer fails to implement a Cisco UCS Manager integration manager. The credentials and IP connectivity between Cisco APIC and UCS Manager are configured as expected.
Which action resolves the issue?

A.Disable HTTP to HTTPS redirection in Cisco UCS Manager
B.Enable JSON API on the Cisco UCS Manager
C.Change the Integration Manager name to FQDN of the Cisco UCS Manager
D.Install ExternalSwitch app in the APIC controller

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/virtualization/Cisco-ACI-Virtualization-Guide-411/Cisco-ACI-Virtualization-Guide-411_chapter_01110.html

Question No : 5
Refer to the exhibit.

A Cisco UCS Fabric Interconnect fails during the upgrade process. The working images of the fabric interconnect are stored on the bootflash.
Which set of commands recovers the fabric interconnect?

A.loader> dir loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin switch(boot)# init system switch(boot)# reload switch(boot)# load ucs-6300-k9-system.5.0.2.N1.3.02d56.bin
B.loader> dir loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin switch(boot)# copy ics-manager-k9.1.4.1k.bin nuova-sim-mgmt-nsg.0.1.001.bin switch(boot)# boot ucs-6300-k9-system.5.0.2.N1.3.02d56.bin
C.loader> dir loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin switch(boot)# init system switch(boot)# reload switch(boot)# boot ucs-6300-k9-system.5.0.2.N1.3.02d56.bin
D.loader> dir loader> boot ucs-6300-k9-kickstart.5.0.2.N1.3.02d56.bin switch(boot)# copy ics-manager-k9.1.4.1k.bin nuova-sim-mgmt-nsg.0.1.001.bin switch(boot)# load ucs-6300-k9-system.5.0.2.N1.3.02d56.bin

Answer:

Question No : 6
DRAG DROP
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image.
Drag and drop the recovery steps from the left onto the correct order on the right.

Answer:

Question No : 7
Refer to the exhibit.

An engineer discovered a VFC interface in a down state on a Cisco Nexus Switch.
Which action resolves the problem?

A.Change the cable between the switch and the server
B.Reset the Cisco Nexus port toward the file server
C.Update the CNA firmware and driver versions
D.Modify the fip keepalive message time to 30 seconds

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/N5K_Troubleshooting_Guide/n5K_ts_fcoe.html

Question No : 8
Refer to the exhibit.

A recent configuration change removes the HSRP adjacency between the SW-1 and SW-2 Cisco Nexus switches. The change causes the servers on this subnet to lose Internet access.
Which action restores the connectivity of all servers on VLAN 13?

A.Disable HSRP IP redirects on SW-1.
B.Set the HSRP priority to 70 on SW-1.
C.Activate HSRP preempt on SW-2.
D.Set the HSRP password on SW-2.

Answer:

Question No : 9
When the engineer runs the command, this error is received:
opsengineer@wkst1:/home/auto/bash_scripts$ curl Cs Cb cookie_file_39422186.txt CX GET Ck 192.15.132.101/api/node/class/Tenant.json {“totalCount”:”1”,”imdata”:[{“error”:{“attributes”:{“code”:”400”,”text”:”Request failed, (output omitted)”}}}]}
Which action resolves the issue?

A.Regenerate the API token object
B.Modify the URI to 192.15.132.101/api/node/class/fvTenant.json
C.Add the Cc class Tenant flag to the cURL command
D.Change the HTTP verb to POST

Answer:
Explanation:
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/DEVNET-2000.pdf

Question No : 10
Refer to the exhibit.

A Postman call to a Cisco APIC fails. The access credentials were confirmed to be configured as expected.
Which action resolves the issue?

A.Change operation type to POST
B.Modify the protocol to HTTP
C.Change the IP address to a domain name
D.Modify the target protocol type to XML

Answer:

Test Online Free Cisco 300-615 Exam Questions and Answers