Free Demo Questions

Test Online Free Cisco 300-430 Exam Questions and Answers

Practice a live sample before buying full access. This page keeps the free 300-430 question set organized by page so visitors and search engines can reach the canonical -questions.html URL directly.

Updated Mar 17, 2026 86 Questions 6 Pages

Get 300-430 Full Access

Question 76 Selectable Answer

A wireless engineer needs to implement client tracking.
Which method does the angle of arrival use to determine the location of a wireless device?

A. received signal strength
B. triangulation
C. time distance of arrival
D. angle of incidence

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich2.html

Question 77 Selectable Answer

An engineer is configuring a BYOD deploymernt strategy and prefers a single SSID model.
Which technology is required to accomplish this configuration?

A. mobility service engine
B. wireless control system
C. identify service engine
D. Prime Infrastructure

Answer:

Question 78 Selectable Answer

A customer has a distributed wireless deployment model where the WLCs are located in the data centers. Because the file servers are located in the data center, the traffic from the corporate WLAN “Corp-401266017” must go through the controllers, where the guest WLAN “Guest-19283746” traffic must use the local Internet line installed in each office.
Which configuration will accomplish this task?

A. Disable Local Switching for the corporate and guest WLA
B. Disable Local Switching for the corporate WLAN and enable it for the guest WLA
C. Enable Local Switching for the corporate and guest WLA
D. Enable Local Switching for the corporate WLAN and disable it for the guest WLA

Answer:

Question 79 Selectable Answer

A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors.
When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?

A. 1
B. 2
C. 5
D. 7

Answer:

Question 80 Selectable Answer

Which two restrictions are in place with regards to configuring mDNS? (Choose two.)

A. mDNS uses only UDP port 5436 as a destination port.
B. mDNS cannot use UDP port 5353 as the destination port.
C. mDNS is not supported on FlexConnect APs with a locally switched WLA
D. Controller software must be newer than 7.0.6+.
E. mDNS is not supported over IPv6.

Answer:

Question 81 Selectable Answer

An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?

A. Change the WLAN reserved bandwidth for WebEx
B. Create an AVC profile for WebEx
C. Create an ACL for WebEx
D. Change the AVC application WebEx-app-sharing to mark

Answer:

Question 82 Selectable Answer

Refer to the exhibit.

The security team has implemented ISE as an AAA solution for the wireless network. The wireless engineer notices that though clients are able to authenticate successfully, the ISE policies that are designed to place them on different interfaces are not working.
Which configuration must be applied in the RADIUS Authentication Settings section from the ISE Network Device page?

A. Disable KeyWrap.
B. Use ASCII for the key input format.
C. Change the CoA Port.
D. Correct the shared secret.

Answer:

Question 83 Selectable Answer

Which configuration is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?

A. Enable IGMPv3 on the central Layer 3 switch.
B. Enable IGMP snooping on the WL
C. Enable multicast mode on the WL
D. Create multicast groups on the central Layer 3 switch.

Answer:

Question 84 Selectable Answer

An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients.
How should the CAPWAP multicast group address be assigned during configuration?

A. Each WLC must be assigned a unique multicast group address.
B. Each WLC management address must be in the same multicast group.
C. Both WLCs must be assigned the same multicast group address.
D. Each WLC management address must be in a different multicast group.

Answer:

Question 85 Selectable Answer

An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window.
Which setting on Cisco CMX allows the engineer to view the tags?

A. Enable RFID tags in tracking options.
B. Enable probing clients for active tags.
C. Define an RFID group globally and add the tags.
D. Enable hyperlocation services for RFI

Answer:

Question 86 Selectable Answer

An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely.
What is configured on the Cisco WLC to allow the user to print a printer on his home network?

A. split tunneling
B. SE-connect
C. FlexConnect
D. AP failover priority

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/aironet-602-officeextend-access-point/117540-configure-splittunneloeap-00.html

Current Exam

300-430

Cisco
Implementing Cisco Enterprise Wireless Networks (ENWLSI)

View Full 300-430 Package