Question No : 1
After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server.
Which action accomplishes this task?

• A.Manually edit /etc/ntp.conf using an XML editor before restarting the server by using service restart all services.
• B.Log in to the Cisco CMX CLI and issue set ntp server NTP_IP where NTP_IP is the IP of the NTP server.
• C.Manually edit /etc/ntp.conf as the admin user before restarting ntpd by using service ntpd restart.
• D.Log in to the Cisco CMX GUI as the administrator and type the IP address of the NTP server in System tab > Settings> TimeZone/NT

Show Answers

Answer:
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200906-Troubleshooting-CMX-connectivity-with- WL.pdf

Question No : 2
A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing.
Which configuration within the network device configuration should be verified?

• A.SNMP RO community
• B.device interface credentials
• C.device ID
• D.shared secret

Show Answers

Answer:

Question No : 3
You are configuring the social login for a guest network.
Which three options are configurable social connectors in Cisco CMX Visitor Connect? (Chose three)

• A.Linkedn
• B.Pinterest
• C.Medium
• D.Google+
• E.Facebook
• F.Myspace

Show Answers

Answer:

Question No : 4
An engineer must implement a BYOD policy with these requirements:
• Onboarding unknown machines
• Easily scalable
• Low overhead on the wireless network
Which method satisfies these requirements?

• A.triple SSID
• B.single SSID
• C.open SSID
• D.dual SSID

Show Answers

Answer:

Question No : 5
WPA2 Enterprise with 802.1X is being used for clients to authenticate to a wireless network through a Cisco ISE server. For security reasons, the network engineer wants to ensure that only PEAP authentication is used. The engineer sent instructions to clients on how to configure the supplicants, but the ISE logs still show users authenticating using EAP-FAST.
Which action ensures that access to the network is restricted for these users unless the correct authentication mechanism is configured?

• A.Enable AAA override on the SSID, gather the usernames of these users, and disable the RADIUS accounts until the devices are correctly configured.
• B.Enable AAA override on the SSID and configure an ACL on the WLC that allows access to users with IP addresses from a specific subnet.
• C.Enable AAA override on the SSID and configure an access policy in Cisco ISE that denies access to the list of MACs that have used EAP-FAS
• D.Enable AAA override on the SSID and configure an access policy in Cisco ISE that allows access only when the EAP authentication method is PEA

Show Answers

Answer:

Question No : 6
For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu.
Which kind of traffic does this change apply to as soon as the change is made?

• A.wireless traffic only
• B.wired traffic only
• C.VPN traffic
• D.wireless and wired traffic

Show Answers

Answer:

Question No : 7
When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?

• A.It has a set of predefined profiles that you cannot modify further
• B.It matches traffic and assigns each matched packet to QoS groups
• C.It automates deployment of wired QoS and makes wireless QoS implementation easier
• D.It allows the output policy map to put specific QoS queues into specific subgroups

Show Answers

Answer:

Question No : 8
A network engineer is implementing a wireless network and is considering deploying a single SSID for device onboarding.
Which option is a benefit of using dual SSIDs with a captive portal on the onboard SSID compared to a single SSID solution?

• A.limit of a single device per user
• B.restrict allowed devices types
• C.allow multiple devices per user
• D.minimize client configuration errors

Show Answers

Answer:

Question No : 9
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX.
Which two parameters are relevant? (Choose two.)

• A.X, Y real location
• B.client description
• C.AP name
• D.client MAC address
• E.WLC IP address

Show Answers

Answer:

Question No : 10
What is the Cisco recommended configuration for a Cisco switch port connected to an AP in local mode for optimal voice over WLAN performance with an 8821 wireless phone?

• A.switchport encapsulation dot1q switchport mode trunk mls qos trust device cisco-phone
• B.switchport mode access mls qos trust device cisco-phone
• C.switchport mode access mls qos trust cos
• D.switchport mode access mls qos trust dscp

Show Answers

Answer:
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/8821/english/Deployment/8821_wlandg.pdf